TNV Series 13.4-83.4hp

The new TNV Series engines delivers a host of new features to bring the acclaimed 'clean and silent' TNE Series to a whole new performance level. Meaning Total New Value, the Yanmar TNV Series offers a range of new engine improvements to make these popular work horses even more efficient, more quiet and more refined than ever.

The smaller Indirect Injection (IDI) engines have been made more efficient with Yanmar Researchers improving engine combustion by altering flow mixing of air and fuel while a new, more compact  in-line fuel injection pump has been developed for the TNV Series for faster fuel control and lower emissions.

The larger Direct Injection (DI) engines have also seen a makeover. Uneven atomisation of fuel in the combustion chamber has been reduced by changing the angle of the injector nozzle. A greater swirl effect in the combustion chamber has been achieved to increase the fluid energy of the air and fuel charge plus a new MP fuel injection pump delivers high injection pressure and more even injection between the cylinders. Uniform atomisation is further enhanced with a more perforated fuel injection nozzle and engine noise is minimised with an optimised cylinder block and muffler design.

• Water Cooled by Radiator
• Vertical Multi Cylinder
• Most models Direct Injection (lower hp models IDI)

Emission Reduction
Cleaner engines with even lower exhaust emissions are achieved by improving on the already excellent TNE base. Stricter emissions standards are cleared by a wide margin.

IDI Engines
Combustion Chamber.
By investigating flow characteristics using experimental and numerical analysis methods, Yanmar research has achieved improved flow mixing in both the main chamber and the special mouth surrounding the injector.

Fuel Injection Equipment
Mechanical Pump - Instead of a PFR pump, a newly developed in-line pump has been used for the smaller TNV engines. Adjustments are made solely in the Yanmar's own FIE factory ensuring precise compliance with regulations.

DI Engines
Nozzle Insulation Angle.
The installation angle of the fuel injection nozzle is greater than that in conventional engines, so that uneven atomization of fuel between injections can be reduced. Excellent matching between intake swirl ratio and the shape of the combustion chamber has resulted in uniform mixing of fuel in the combustion chamber.

Combustion Chamber
It increase the fluid energy of the air and fuel charge. The swirl effect produced in the chamber continues while combustion occurs, aiding mixing and results in lower exhaust emissions compared to conventional chambers.

Fuel Injection Equipment
MP Pump. A new MP pump has been developed especially for the TNV engine series. Our aim was to make improvements over a wide range of areas to even further reduce emissions.

Fuel Injection Nozzle
Multiple numbers of very small holes are used to achieve uniform atomization.
Holes are not simple drilled, their inside edges are carefully rounded to promote even flow and direction of spray, also to reduce resistance.
Low sack nozzle profile improves combustion. Double corn shape protects from cavitation.

Noise Level Reduction
Cylinder Block Noise Reduction.
Yanmar's original CAE techniques have optimized the stiffness, minimized transformation and reduced radiant noise.

Muffler Noise Reduction
Original CAE technique is used to design a muffler with optimized volumes and sound isolation materials.

MODEL	Max Output (hp @ rpm)	Bore x Stroke (mm)	Displacement (cc)	Dry Weight (kg)
2TNV70	13.4 @ 3600	70 x 74	0.57	73
3TNV70	21.5 @ 3600	70 x 74	0.854	87
3TNV76	26.1 @ 3600	76 x 82	1.116	94
3TNV82A	29.4 @ 3000	82 x 84	1.331	112
3TNV84T	39.0 @ 2800	84 x 90	1.496	142
3TNV88	36.3 @ 3000	88 x 90	1.642	138
4TNV84T	55.3 @ 3000	84 x 90	1.995	165
4TNV88	47.5 @ 3000	88 x 90	2.19	160
4TNV98	68.5 @ 2500	98 x 110	3.319	235(SAE#4)
4TNV98T	83.8 @ 2500	98 x 110	3.319	245(SAE#)